The Rapid Ridge vent from Benjamin Obdyke Inc. installs quickly and prevents weather and insect infiltration. The vent’s low-profile design sits under the ridge cap shingles to provide almost invisible protection. Its three-dimensional nylon matrix will not split or crack.
The OMG OlyVent one-way vent and two-way breather can be used with either single-ply or BUR applications. Engineered from heavy gauge, spun aluminum, its conical shape allows for easy installation and a high performance flashing detail. The vent’s wide base opening out-performs cylindrical vents.
The Roof Saver ridge vent system from Blocksom & Co. is a cost-effective, aesthetically appealing ventilation system. It passed rigorous Miami-Dade County approval testing, including hurricane simulations with 110 mph wind-driven rain. Easy to install, the ridge vent consists of 100 percent natural fiber that grips tightly to the roof.
Z-Plank Laminated Veneer Lumber Scaffold Plank from Kennison Forest Products Inc. is a strong, lightweight scaffold plank manufactured in accordance with A/NZS 4357:1995 Structural Laminated Veneer Lumber. Strict quality control in the ANSI A10.8-compliant manufacturing process ensures each plank’s safe, structural uniformity.
The new Max Climber 7700 work platform from Beta Max Inc. can travel 400 feet high at a speed of 35 feet per minute. Installing the system is a simple process that does not require a forklift or crane. The masts are easily broken down and transported in 5-foot sections weighing 110 pounds each.
The LadderPro medium-duty telescoping plank from Louisville Ladder Inc. is available in 13-, 16-, and 19-foot full extension sizes. The plank is manufactured with heavy-wall aluminum tubing to prevent common twisting and flexing. Its built-in, skid-resistant surface reduces slipping and the product stores and transports in approximately half of its fully extended length.
Grabber Scaffolding is engineered with a patented peg double redundancy system for safety. The scaffolding is easy to set up and tear down and can be configured for almost any job. The product features over-center locking system casters, has a maximum capacity of 1,000 pounds and is available with in 4-, 6- and 8-foot lengths.
The Alum-A-Pole Corp.’s scaffolding system exceeds OSHA standards and is laboratory load tested in excess of 5,000 pounds. It features a lifetime non-slip, non-wear, replacement warranty and has been job-tested up to 25 years. Available in 6-, 12-, 18-, and 24-foot lengths, its poles are made from special structural aluminum that is permanently mated to Saf-T-Grip rubber.
The Hydro Mobile P-Series mast-climbing work platform is designed for small jobs between 15 and 100 feet high. At 28 feet in length, its innovative hydraulic system features a high load capacity of 6,000 pounds. The portable climbing platform can fit in a 36-inch opening, and it easily sets up in 45 minutes.
The 10-foot by 24-foot Hatch Ladder Deck from Falcon Ladder & Scaffold Mfg. allows roofers to climb from one level to the next safely. Designed to be used on a 6-foot, 6-inch Walk Thru Frame, it features a load capacity of 75 pounds per square foot. It has a heavy-duty aluminum 2.5-inch ladder step and side rail, and ladders can be locked underneath it for easy access and transportation.
RSS