Solar Panel Flashing Membrane

MFM Building Products

Peel & Seal is a self-adhering flashing membrane composed of an aluminum top film laminated to two cross-laminated polyethylene films for outstanding durability. Designed to be left exposed indefinitely, Peel & Seal self-seals around fasteners that hold the solar panel mounting brackets to the roof surface to form a leak-proof barrier. Peel & Seal is available in four color options and seven width choices to match your project requirements. It is tested to ASTM D 1970, ICC-ES ESR 1654, Florida Building Code, Miami-Dade County, and FORTIFIED listed. For a free sample, visit mfmbp.com.

Hempsted Lake State Park building

Solar Panel Flashing Membrane

ATAS International

With the increasing installation of rooftop solar arrays, a “solar ready” metal roofing system is the ideal choice for photovoltaic solar systems because of its long service life. When installing a crystalline system (typically warranted for 25 years of power generation), a building owner benefits from a roofing substrate with a greater life expectancy than the solar panels. Standing seam metal panels provide a natural platform for attaching crystalline systems without roof penetrations with the use of special attachment clamps that grip the metal seams. Additionally, highly reflective roofs with cooler rooftop temperatures improve solar panel performance. For more information, visit atas.com.

Automotive wheel system, Synthetic rubber, Rim, ENRGY Anchors, Johns Manville

ENRGY Anchors

Johns Manville

The ENRGY Anchor is designed to work seamlessly with a range of photovoltaic rack-mounted solutions, accommodating various tilt angles and orientations. It provides a modern alternative to conventional roof-penetrating attachment methods and can be installed on most buildings, even in high-wind areas, without adding significant weight. This innovative solution removes the necessity for ballast or pavers, delivering low-distributed loads when used with racking systems and PV modules. Compatible with most seismic zones, it can be applied to different roofing systems using established techniques, creating a cohesive waterproof system through heat-welding or adhesion.For more information, visit jm.com/roofing.

Automotive design, Rectangle PVKIT HUR, S-5!

PVKIT HUR

S-5!

The PVKIT HUR is the first rail-less PV mounting system designed for high wind uplift performance of installed solar panels, such as in coastal communities and other high-wind and hurricane-zone areas. It’s also the first metal roof PV mounting system to achieve FM Approvals' toughest PV Standard, FM4478.

  • Provides a low-profile aesthetic solution
  • Reduces materials required due to rail-less system
  • Reduces carbon footprint
  • Cuts installation time dramatically compared to traditional systems
  • Reduces the cost and complexity of transporting materials
  • Reduces added dead load of mounting components
  • Improves load distribution by 25% over rail-based installations
  • Warranted for the life of the roof/PV system

For more information, visit S-5.com.

Audio equipment, Gadget, Split-Top Butyl Deck Mount, QuickBOLT

Split-Top Butyl Deck Mount

QuickBOLT

The Split-Top Butyl Deck Mount is designed for fast and leak-proof installations on asphalt, EPDM, and TPO roofs. This mount features an open channel rail system that uses saddle mounts or allows for easy drop-in rail insertion. The butyl base ensures superior water protection and quick placement, while the stainless steel T-foot provides easy leveling and rail adjustment. Each mount comes with 5/16-inch by 2.5-inch stainless steel hex lag screws with sealing washers for a secure fit. For more information, visit quickbolt.com.

Drift Solar Snow Fence System

Drift Solar Snow Fence System

Rocky Mountain Snow Guards, Inc.

Drift Solar Snow Fence System from Rocky Mountain Snow Guards, Inc. carefully handles the melting conditions of fallen snow. Designed specifically for snow retention below solar panel installations on shingle roofs, the 12-inch tall, 4-pipe aluminum Drift Solar snow retention system ensures no snow slips past the metal snow fence. It serves as a “catch basin” for snow. The system comes in Mill Finish Aluminum or Coated Aluminum. Suitable for new and retrofit roof applications, brackets must be bolted to the roof support structure. Free layouts and quotes for product placement.For more information, visit rockymountainsnowguards.com.