Available from Roofmaster, the solar-powered Marathon Sol-A-Vent eliminates continuous ventilation problems when electricity is unavailable or cost prohibitive. The product’s 4-inch diameter solar cell generates electricity in both high sunlight and in dim, shaded or cloudy daylight.
The Rapid Ridge vent from Benjamin Obdyke Inc. installs quickly and prevents weather and insect infiltration. The vent’s low-profile design sits under the ridge cap shingles to provide almost invisible protection. Its three-dimensional nylon matrix will not split or crack.
The OMG OlyVent one-way vent and two-way breather can be used with either single-ply or BUR applications. Engineered from heavy gauge, spun aluminum, its conical shape allows for easy installation and a high performance flashing detail. The vent’s wide base opening out-performs cylindrical vents.
The Roof Saver ridge vent system from Blocksom & Co. is a cost-effective, aesthetically appealing ventilation system. It passed rigorous Miami-Dade County approval testing, including hurricane simulations with 110 mph wind-driven rain. Easy to install, the ridge vent consists of 100 percent natural fiber that grips tightly to the roof.
Z-Plank Laminated Veneer Lumber Scaffold Plank from Kennison Forest Products Inc. is a strong, lightweight scaffold plank manufactured in accordance with A/NZS 4357:1995 Structural Laminated Veneer Lumber. Strict quality control in the ANSI A10.8-compliant manufacturing process ensures each plank’s safe, structural uniformity.
The new Max Climber 7700 work platform from Beta Max Inc. can travel 400 feet high at a speed of 35 feet per minute. Installing the system is a simple process that does not require a forklift or crane. The masts are easily broken down and transported in 5-foot sections weighing 110 pounds each.
The LadderPro medium-duty telescoping plank from Louisville Ladder Inc. is available in 13-, 16-, and 19-foot full extension sizes. The plank is manufactured with heavy-wall aluminum tubing to prevent common twisting and flexing. Its built-in, skid-resistant surface reduces slipping and the product stores and transports in approximately half of its fully extended length.
Grabber Scaffolding is engineered with a patented peg double redundancy system for safety. The scaffolding is easy to set up and tear down and can be configured for almost any job. The product features over-center locking system casters, has a maximum capacity of 1,000 pounds and is available with in 4-, 6- and 8-foot lengths.
The Alum-A-Pole Corp.’s scaffolding system exceeds OSHA standards and is laboratory load tested in excess of 5,000 pounds. It features a lifetime non-slip, non-wear, replacement warranty and has been job-tested up to 25 years. Available in 6-, 12-, 18-, and 24-foot lengths, its poles are made from special structural aluminum that is permanently mated to Saf-T-Grip rubber.
The Hydro Mobile P-Series mast-climbing work platform is designed for small jobs between 15 and 100 feet high. At 28 feet in length, its innovative hydraulic system features a high load capacity of 6,000 pounds. The portable climbing platform can fit in a 36-inch opening, and it easily sets up in 45 minutes.